M2 Thread Specs
Standard: ISO 261 (ISO Metric Coarse)
This reference guide outlines the technical dimensions and tapping parameters for the standard M2 metric thread.
Part of the ISO Metric Coarse series defined by ISO 261, the thread features a nominal diameter of 2 mm and a pitch of 0.4 mm.
For machining or fabrication, the recommended tap drill size is 1.6 mm (for 75% thread depth) or 1.62 mm (for 65% thread depth).
Dimensional Specifications (mm)
Nominal Diameter
2 mm
Pitch
0.4 mm
Threads per mm
2.5
Major Diameter
2 mm
Pitch Diameter (d₂)
1.74 mm
Minor Diameter (d₁) Ext
1.567 mm
Minor Diameter (D₁) Int
1.625 mm
Thread Height
0.346 mm
Root Radius
0.058 mm
Drilling & Strength Specs
Tap Drill (75%)
1.6 mm
Tap Drill (65%)
1.62 mm
Stress Area
2.07 mm²
Stress Diameter
1.509 mm
Quick Unit Converter
mm
⇄
inch
Frequently Asked Questions
What is the tap drill size for a M2 thread?
For standard thread engagement (approx. 75%), the recommended tap drill size for M2 is 1.6 mm. For a slightly looser 65% thread engagement, a 1.62 mm drill bit is recommended.
What is the pitch of a M2 thread?
The thread pitch for a standard M2 thread is 0.4 mm, which equates to approximately 2.5 threads per millimeter.
What are the major and pitch diameters for M2?
The nominal major diameter of M2 is 2 mm. The calculated pitch diameter (d₂) is 1.74 mm per the ISO 68-1/ISO 261 standards.