M6x0.75 Thread Specs
Standard: ISO 261 (ISO Metric Fine)
This reference guide outlines the technical dimensions and tapping parameters for the standard M6x0.75 metric thread.
Part of the ISO Metric Fine series defined by ISO 261, the thread features a nominal diameter of 6 mm and a pitch of 0.75 mm.
For machining or fabrication, the recommended tap drill size is 5.25 mm (for 75% thread depth) or 5.3 mm (for 65% thread depth).
Dimensional Specifications (mm)
Nominal Diameter
6 mm
Pitch
0.75 mm
Threads per mm
1.33
Major Diameter
6 mm
Pitch Diameter (d₂)
5.513 mm
Minor Diameter (d₁) Ext
5.188 mm
Minor Diameter (D₁) Int
5.296 mm
Thread Height
0.65 mm
Root Radius
0.108 mm
Drilling & Strength Specs
Tap Drill (75%)
5.25 mm
Tap Drill (65%)
5.3 mm
Stress Area
22.03 mm²
Stress Diameter
5.08 mm
Quick Unit Converter
mm
⇄
inch
Frequently Asked Questions
What is the tap drill size for a M6x0.75 thread?
For standard thread engagement (approx. 75%), the recommended tap drill size for M6x0.75 is 5.25 mm. For a slightly looser 65% thread engagement, a 5.3 mm drill bit is recommended.
What is the pitch of a M6x0.75 thread?
The thread pitch for a standard M6x0.75 thread is 0.75 mm, which equates to approximately 1.33 threads per millimeter.
What are the major and pitch diameters for M6x0.75?
The nominal major diameter of M6x0.75 is 6 mm. The calculated pitch diameter (d₂) is 5.513 mm per the ISO 68-1/ISO 261 standards.