M90 Thread Specs
Standard: ISO 261 (ISO Metric Coarse)
This reference guide outlines the technical dimensions and tapping parameters for the standard M90 metric thread.
Part of the ISO Metric Coarse series defined by ISO 261, the thread features a nominal diameter of 90 mm and a pitch of 6 mm.
For machining or fabrication, the recommended tap drill size is 84 mm (for 75% thread depth) or 84.37 mm (for 65% thread depth).
Dimensional Specifications (mm)
Nominal Diameter
90 mm
Pitch
6 mm
Threads per mm
0.17
Major Diameter
90 mm
Pitch Diameter (d₂)
86.103 mm
Minor Diameter (d₁) Ext
83.505 mm
Minor Diameter (D₁) Int
84.371 mm
Thread Height
5.196 mm
Root Radius
0.866 mm
Drilling & Strength Specs
Tap Drill (75%)
84 mm
Tap Drill (65%)
84.37 mm
Stress Area
5590.8 mm²
Stress Diameter
82.639 mm
Quick Unit Converter
mm
⇄
inch
Frequently Asked Questions
What is the tap drill size for a M90 thread?
For standard thread engagement (approx. 75%), the recommended tap drill size for M90 is 84 mm. For a slightly looser 65% thread engagement, a 84.37 mm drill bit is recommended.
What is the pitch of a M90 thread?
The thread pitch for a standard M90 thread is 6 mm, which equates to approximately 0.17 threads per millimeter.
What are the major and pitch diameters for M90?
The nominal major diameter of M90 is 90 mm. The calculated pitch diameter (d₂) is 86.103 mm per the ISO 68-1/ISO 261 standards.