1-3/16-18 UNEF Thread Specs
Standard: ASME B1.1 (UNEF)
Find the technical dimensions, threads per inch (TPI), and tapping guidelines for the 1-3/16-18 UNEF unified thread.
Compliant with the ASME B1.1 standard, this size has a nominal major diameter of 1.1875 inches (30.16 mm) with a pitch of 0.05556 inches (TPI of 18).
For general engineering or fastening, the standard recommended tap drill is 1.1319 inches (28.75 mm) to achieve adequate thread engagement.
Dimensional Specifications (Inches & mm)
Size Designation
1-3/16-18 UNEF
Major Diameter (Nominal)
1.1875 in(30.16 mm)
TPI (Threads per Inch)
18
Pitch
0.05556 in
Pitch Diameter
1.1514 in(29.25 mm)
Minor Diameter (Ext)
1.1274 in(28.63 mm)
Minor Diameter (Int)
1.1334 in(28.79 mm)
Thread Height
0.0481 in
Drilling & Strength Specs
Tap Drill Size
1.1319 in(28.75 mm)
Stress Area
1.0089 in²(650.88 mm²)
Quick Unit Converter
mm
⇄
inch
Frequently Asked Questions
What is the tap drill size for 1-3/16-18 UNEF?
The recommended tap drill size for a 1-3/16-18 UNEF thread is 1.1319 inches (approx. 28.75 mm) to achieve standard thread engagement.
How many threads per inch (TPI) does a 1-3/16-18 UNEF bolt have?
A standard 1-3/16-18 UNEF thread has exactly 18 threads per inch (TPI), with a corresponding linear pitch of 0.05556 inches.
What is the major diameter of a 1-3/16-18 UNEF thread in millimeters?
The nominal major diameter of a 1-3/16-18 UNEF thread is 1.1875 inches, which converts to 30.16 mm.