M10x1.25 Thread Specs
Standard: ISO 261 (ISO Metric Fine)
This reference guide outlines the technical dimensions and tapping parameters for the standard M10x1.25 metric thread.
Part of the ISO Metric Fine series defined by ISO 261, the thread features a nominal diameter of 10 mm and a pitch of 1.25 mm.
For machining or fabrication, the recommended tap drill size is 8.75 mm (for 75% thread depth) or 8.83 mm (for 65% thread depth).
Dimensional Specifications (mm)
Nominal Diameter
10 mm
Pitch
1.25 mm
Threads per mm
0.8
Major Diameter
10 mm
Pitch Diameter (d₂)
9.188 mm
Minor Diameter (d₁) Ext
8.647 mm
Minor Diameter (D₁) Int
8.827 mm
Thread Height
1.083 mm
Root Radius
0.18 mm
Drilling & Strength Specs
Tap Drill (75%)
8.75 mm
Tap Drill (65%)
8.83 mm
Stress Area
61.2 mm²
Stress Diameter
8.466 mm
Quick Unit Converter
mm
⇄
inch
Frequently Asked Questions
What is the tap drill size for a M10x1.25 thread?
For standard thread engagement (approx. 75%), the recommended tap drill size for M10x1.25 is 8.75 mm. For a slightly looser 65% thread engagement, a 8.83 mm drill bit is recommended.
What is the pitch of a M10x1.25 thread?
The thread pitch for a standard M10x1.25 thread is 1.25 mm, which equates to approximately 0.8 threads per millimeter.
What are the major and pitch diameters for M10x1.25?
The nominal major diameter of M10x1.25 is 10 mm. The calculated pitch diameter (d₂) is 9.188 mm per the ISO 68-1/ISO 261 standards.