M14x1.5 Thread Specs
Standard: ISO 261 (ISO Metric Fine)
This reference guide outlines the technical dimensions and tapping parameters for the standard M14x1.5 metric thread.
Part of the ISO Metric Fine series defined by ISO 261, the thread features a nominal diameter of 14 mm and a pitch of 1.5 mm.
For machining or fabrication, the recommended tap drill size is 12.5 mm (for 75% thread depth) or 12.59 mm (for 65% thread depth).
Dimensional Specifications (mm)
Nominal Diameter
14 mm
Pitch
1.5 mm
Threads per mm
0.67
Major Diameter
14 mm
Pitch Diameter (d₂)
13.026 mm
Minor Diameter (d₁) Ext
12.376 mm
Minor Diameter (D₁) Int
12.593 mm
Thread Height
1.299 mm
Root Radius
0.217 mm
Drilling & Strength Specs
Tap Drill (75%)
12.5 mm
Tap Drill (65%)
12.59 mm
Stress Area
124.55 mm²
Stress Diameter
12.16 mm
Quick Unit Converter
mm
⇄
inch
Frequently Asked Questions
What is the tap drill size for a M14x1.5 thread?
For standard thread engagement (approx. 75%), the recommended tap drill size for M14x1.5 is 12.5 mm. For a slightly looser 65% thread engagement, a 12.59 mm drill bit is recommended.
What is the pitch of a M14x1.5 thread?
The thread pitch for a standard M14x1.5 thread is 1.5 mm, which equates to approximately 0.67 threads per millimeter.
What are the major and pitch diameters for M14x1.5?
The nominal major diameter of M14x1.5 is 14 mm. The calculated pitch diameter (d₂) is 13.026 mm per the ISO 68-1/ISO 261 standards.